Empty 19" panels
There are several versions of the panels for different needs and purposes. All versions are available in both SC and LC versions.
Panel without an impact protection
The depth of the panel is 145mm or 200mm. The depth of the panel is 145mm unless the product name has 200mm in it.
The height of the panel for 1-48 SC and 1-96 LC is 1U. There is an own version for 96 SC / 192 LC panel, which height is 2U. There is more information on that later.
The identification codes for the empty panels without impact protection can be found in the adjacent table. Clicking the product code numbers will take you to the product page on the Finnish STK service and clicking the product name will open a picture of the product.
Panel with impact protection
There are two types of impact protectors. One is with foam pull-relief, where there are slots for patch cords.
The identification codes for the empty panels with impact protection and foam pull-relief can be found in the adjacent table. Clicking the product code numbers will take you to the product page on the Finnish STK service and clicking the product name will open a picture of the product.
The other panel with impact protection is without the foam pull-relief. The ends of the impact protector can be bended, which can help installation.
The identification codes for these versions of empty panels can be found in the adjacent table. Clicking the product code numbers will take you to the product page on the Finnish STK service and clicking the product name will open a picture of the product.
Both impact protectors are 95mm in depth, so the overall depth with the panel is 240mm.
The impact protectors can be lowered, which creates room underneath the panel for patch cords. When lowered the overall height is 1 ½ U.
96 SC / 192 LC -panel
In our 19” panel range there is also a panel with the height of 2U. It fits 96 SC connectors or 192 LC connectors. The depth of the panel is little more than in the regular panel, 187mm. The frame of the panel is made from two parts. The upper part is attached with 4 screws. This makes installing easier. By detaching the upper part, you can install the lower part, and when that is done then move on to the upper part. There are holes in the back of the frame and at the bottom of the upper part. These holes help guide the fibers in the right way.
| Product code | Product name |
|---|---|
| 7263175 | Paneeli 19 2-96xSC 2U ilman ts. |
| 7263176 | Paneeli 19 4-192xLC 2U ilman ts. |
